Acid Facilities

Treatment Plants for Acids,

Solvents and Effluents


  • Spent acids purification, de-nitration

  • Acids and solvents concentration

  • Fumes absorption

  • Waste water treatment

Liquid and gaseous effluents deriving from hazardous synthesis plants are critical for environmental problems and often can give decomposition and explosion; BOWAS is also experienced in the design and construction of plants for:

Absorption of nitrous gases (ABS)

Poisonous nitrous gases, NOx are formed in the production of nitric acid as well as in nitration and denitration processes and in the decomposition of nitrobodies.

Depending on the circumstances, several processes can be chosen for their treatment. Mostly, however, the NOx contained in the off-gases are further oxidated, thus producing 50% nitric acid. The subsequent cleaning step can be achieved either by oxidation or by means ofcatalytic reduction.

Nitirc acid with approx. 50-55% strength, depending on the concentration of the nitrous gases, is obtained and is of value for further use.

Sulfuric acid pre-concentration (SAPC) and
high concentration (SAHC)

Forced circulation vacuum evaporators which are extremely efficient, are used to recycle the 70% sulfuric acid and to achieve a concentration of 85%. In a subsequent step, it is also uitilzed for high concentration.

Corrosion resistant materials such as glass, enamel and tantalum were required and found for this process.

Under vacuum the acid boils under notably lower temperatures. The sulfuric acid is pumped into a circulation system with the heat exchanger placed on the lowest point. Evaporation only takes place in an overhead expansion tank thus preventing incrustation of the heating surfaces.

Denitration- nitric acid reconcentration (DENI)

The remaining mixed acid from the nitration process is diluted by the reaction water and contains also product residue. In the denitration unit, this waste acid is divided into its components: nitirc acid and 70% diluted sulfuric acid, the less stable nitrobodies being destroyed. Preferably, concentration of nitric acid is done in the same apparatus.This process is only possible if sufficient sulfuric acid has been added to the waste acid. This sulfuric acid can be reconcentrated (SAPC) in the internal circulation coupled to the DENI. 


  • HNO3 98% 
  • H2O4 70% 
  • nitrous gases 


Denitration is a process for purification of residual mixed acids, which contain as main constituents nitric acid, sulphuric acid, as well as quantities of nitrous acid and organic impurities such as nitro compounds, nitric acid esters and, of course, water. Such residual acids are fumed in the production of NG, NC, DNT, TNT etc.

In order to be able to re-concentrate the spent acid for further use the main components, nitric acid and sulphuric acid must first be separated from each other. This, so called denitration process is achieved by means of extractive distillation.

Major problems:

  • Azeotropic point
  • Intergration with sulphuric acid high concentration
  • Destruction/removal of impurities

Nitrous Fume Absorption

Nitrous fumes occur as by-products e.g. in the nitration of organic compounds, in the decomposition of nitro-compounds of nitric acid, and in the denitration of spent-acids, vapours from acid reconcentration.

During absorption the major portion of the nitrogen oxides are oxidised by atmospheric oxygen. The higher oxides so formed dissolve in water and produce, by reaction, nitric acid.

Major problems:

  • Corrosion
  • Cooling
  • Optimization of Pressure Temperature
  • Apparatus Volume Control


Bowas Partners, Plants and Services Brochure